function of cyclone separator is a good dust removal equipment, whose performance mainly depends on the production rate. Small function of cyclone separator can basically reach a good rate in the process of use, and the effect is basically much better than that of artificial dust removal. In this process, there is no secondary adsorption of dust, basically avoiding the related pollution after. In order to prevent fog in this process and better paste the bag site, the small function of cyclone separator makes good use of the backblowing effect of the relevant high temperature flue gas in this process. Of course, such a tracking system can still grasp such flue gas conditions, more in this product has a very good filtering effect. All machines will have small faults in the process of use, so our small function of cyclone separator is no exception. However, don't worry when encountering a fault, and we should find out the problem within a short time and solve it, so as to stabilize the normal operation of the machine.

The function of cyclone separator after installation should be noted as follows:

function of cyclone separator voltage is three phase alternating current 380 volts, from the function of cyclone separator on the external wire connected to the power supply can start to use, the initial rotation, should pay attention to whether the fan is positive (such as reversal, air volume is very small, Need to replace the power cable).

According to the actual needs, regularly clean the dust, dust in the dust collector, just when the fan and the clearance mechanism stop working, open the sealed ash door, pull out the drawer.

According to the nature of the dust and the capacity of the size, should be fixed time vibration cleaning, generally three to four times per shift vibration, in order to the normal work of the dust collector.

Four, in order to determine the dust removal equipment in a better working condition, should be as close as possible to the source of dust, generally to 1.5 meters to 2.0 meters, the connection pipe as short as possible, and try to reduce the elbow, so as not to increase the resistance loss.

function of cyclone separator Electric control box cover, can not be opened at will when working, such as need to adjust the cleaning time, or need to check the circuit, should be shut down and cut off the power supply in the work.

Six, the dust cover is the key part to determine the function of cyclone separator unit in a better state. The user should make the ideal dust cover according to the shape size of the workpiece, the nature of the dust, in accordance with the principle of pass, close, smooth, seal and design of the dust cover.

Before working, check whether the access door, the ash door and the air duct connecting system are sealed, so as to avoid leakage and reduce the effect of vacuuming.

function of cyclone separator https://www.kaisenfilter.com/What-is-the-function-of-cyclone-separator.html